Embedded Files
Conveyor Rod Gate / Pin Gate / Needle Gate
Rod / Pin Gate
Rod / Pin Gate
Manual / Actuator Operated
Manual / Actuator Operated
Rod Gates shall be fitted between the bunker & equipment below like feeder/screens etc. to control the feed rate and to isolate the equipment from the bunker during maintenance. The gate shall be normally in partial /full open position and shall be controlled manually.
BELT ALIGNMENT WITH TAPERED TROUGHING IDLER
BELT ALIGNMENT WITH TAPERED TROUGHING IDLER
Design Features
Handles Clinker, Limestone, Aggregates, Coal, Minerals, Powder, Pellets, other Granular materials
Material of Construction: Carbon Steel/Stainless Steel
Open/closed or flow regulating of material
Standard sizes: 400 to 1800mm, Square or Rectangular, Contact us for custom size
Actuation: Manual, Pneumatic Tool
All rods shall be of diameter that ensures no bending.
The spacing between rods shall be decided based on size of material stored in hopper/ bin & direct material load.
Heavy-Duty Rollers With Anti-Friction Bearings For Withstanding Head Loads
Heavy-Duty Structural Frames For Greater Rigidity
Dust-Tight Construction To Eliminate Dust Emissions
Page updated
Google Sites
Report abuse